Multifunction Heaven!

Troubleshooting the Multifunction unit

To perform what is known as a hardware reset, look for the printer type below and then read what you have to do to perform the reset.

Basically in a lot of cases the reset can clear up messages what wont go away, such as stop lights flashing "clear up the printer memory" they can generally stop the unit playing up.

Of course it’s not a guaranteed fix, it may be the case that the Multifunction unit is mechanically damaged if this is the case a service will be required.

For the majority of the Hp officejets perform the following.

Take out the power cord leave the unit standing for 30 seconds.

Now leave the power cord out (this may require 2 people depending how well you can improvise)

You need 2 press a combination of 2 buttons. The keys below are located on the front panel of your machine, you press the 2 buttons together at the same time and you then plug the power cord back in to the unit.

This is done at the same time. So you would hold down the 2 required buttons then push the power cord in keeping your fingers on the 2 buttons.

The buttons you need to press Vary from printer to printer. Look below for the buttons for the different type of hp printers.

The Oj in general is normally # and 3 or # and 6

For the Oj D series (example OjD135) hold down # and 6

For the Oj G series hold down # and 6

For the Oj T series hold down # and 6

For the Oj v series hold down # and 3

For the Oj (5110 6110 7130 7130xi) hold down # and 6

For the psc 2210 series hold down # and 6

For the psc 2210 hold down cancel and the left arrow key

For the psc 1210 take the power cord out, put the power cord back in, when the lights flash, hold down resume and enter then let go.

For all others I would suggest using # and 6, this is the most popular reset.

For Lexmark and Epson units I would suggest doing the desk jet reset, which is, the mechanical reset, you do the desk jet reset but on the all in one unit.

Click on troubleshooting printers on the left navigational bar for the required information.

To simplify the above, to perform a hardware reset follow this as an example.

Lets say im using a Multifunction Ojd135 and the unit was playing up.

I was at the stage where I just wanted to dump it in the bin. (Not recommended but frustration has been known to lead to this :))

When the unit is powered on pull the power Cord out. I would hold down # and 6, at the same time plug the power cord back in and wait until the display read semi full reset.

I would then leave go of # and 6. Normally the unit will ask to reset the date and time also.

To set the language just follow the instructions on the panel.

It’s straightforward and tells you what to press for each setting.

Then to see if the reset has resolved the problem. I would run a print.

Most Hp all in one devices, you can do a test page from the hard ware its self to see if the unit is working.

To do this press set-up or menu on the front panel of the Multifunction, scroll along with the right arrow key to print report, hit enter, nowScroll along again with the right arrow key to self-test report, hit enter.

The machine if working will print a test page.Hopefully if it was just a hardware reset needed this should now allow you to continue with your daily tasks.

Hardware resets for Hp Multifunction devices can be very useful indeed and a good asset to you if you know how to perform them.

Obviously if the machine is making horrific noises, or the cartridges are stuck on the right.

I would recommend going to the manufactures site following any cleaning recommended and if still unsatisfied a service may be required.

If you are having trouble communicating with your Multifunction printer regardless of the make or type of the mulifunction.

I have written a useful article for trying to resolve this situation, and also explained what conflicts could be the problem.

Multifunction and deskjet Communication

Low cost buying guides

Choosing cheap computer systems
Choosing cheap computer cases
Check out cheap hard drives
Buying the right cheap used computer
Choosing cheap computer monitors
Buying cheap computer memory guide
Choosing the best cheap flat panel monitors
Check out my cheapest laptop reviews here
Choosing cheap computers
Cheap computer parts guide
Choosing cheap scanners
Cheap laptops
Cheap computer books
Cheap computer desks guide

Buying guides